|
General Description:
SAPTEX-STYROSAP is a rigid closed-cell expanded foam Polsyrene foam moulded or injected, produced in various densities and shapes. SAPTEX-STYROSAP products are used to insulate floors, walls, roofs & pipes. SAPTEX-STYROSAP can be used for: void forming, light weight concrete, soil filtering, packaging… etc. its produced in densities ranging from 16 to 35 kg/m^3 and in different forms, such as boards ( for floors, walls & roofs ), pipe sections for pipe insulation, special forms as hordi blocks, inserts for Styroblocks and other special shapes used for different application.
|
|
APPLICATION
STYRO-COMP boards comprising of gypsum plaster board bonded to the insulation for internal insulation.
STYRO-BLOCKS made of concrete having SAPTEX inserts in the center for construction.
FLOOR & ROOF INSULATION Styroof boards density range from 24 to 35 kg/m^3 are used, for floor and roof insulation.
Hordistyrene blocks also be used as an alternate to concrete blocks in rib slabs.
PIPE INSULATION Styro-Pipes of density range from 24 to 35 kg/rn3 are used
for pipe insulation. These are supplied in sections with factory applied aluminum foil jacketed or plain.
Sizes:
Board: 500 X 2000, 1000 X 2000, AND 1200 X 2000 (MM).
Other sizes are available on request.
Boards with straight or rebated edges can be supplied.
Pipes: 15 mm dia and upwards with 20 mm thickness and above.
Hordistyrene: 400/350 X 250 (mm) (other sizes on request).
Styro blocks: 400 x 200 x 65 (mm) (other sizes on request).
SAPTEX-STYROSAP is vermin and rodent proof & inter to most of the
chemicals.